spsemi ... www.spsemi.cn page 1 of 6 glass passivated junction transient voltage suppressor voltage - 6.8 to 550 volts 400 watt peak power/1.0watt steady state features plastic package glass passivated chip junction in do-41 package 400w surge capability at 10/1000 s wave form excellent clamping capability low zener impedance fast response time: typically less than 1.0ps from 0 volts to b min. v t ypical ir less than 1 a above 10v high temperature soldering guaranteed: 265c/10 seconds/.375", (9.5mm) lead length, 5lbs., (2.3kg) tension pb-free plated p4ke(400w) series mechanical data case: jedec do-41 molded plastic terminals: solderable per mil-std-750,method 2026 polarity: color band denotes cathode except bipolar any mounting position: 0.012 ounce, 0.3 grams weight: devices for bipolar application for bidirectional use c or ca suffix for types p4ke6.8 thru types p4ke550 (e.g. p4ke6.8c , p4ke550ca) electrical characteristics apply in both directions maximum ratings and characteristics ratings at 25 ambient temperature unless otherwise specified. notes : 1.non-repetitive current pulse , per fig. 3 and derated above t = 25 per fig. 2 . a 2.mounted on copper pad area of 1.61.6" (4040mm) per fig. 5 3.8.3ms single half sine-wave , or equivalent square wave, duty cycle = 4 pulses per minutes maximum. peak forward surge current,8.3ms single half sine-wave superimposed on rated load,(jedec method) (note3) operating junction and storage temperature range rating symbol value units p ppm i fsm t, t js tg minimum 400 1 - 55 to +150 20 watts amps p m(a v) w atts peak pulse power dissipation at t 25 t ap == , () 1ms note 1 steady state power dissipation at t lead l =75 , .. lengths 375 9 5mm note 2 ",( ) ( ) rev 2016 08 10
spsemi www.spsemi.cn page 2 of 6 dimensions (do-41) do-204al(do-41) dimensions in inches and(millimeters) 1.0 25.4 () min. 0.205 5.2 () 0.160 4.1 () 1.0 25.4 () min. 0.034 0.86 () 0.028 0.71 () 0.107 2 7 (.) 0.080 2 0 (.) dia. p4ke(400w) series dia. p4ke6.8a p4ke7.5a p4ke8.2a p4ke9.1a p4ke10a p4ke1 1a p4ke12a p4ke13a p4ke15a p4ke16a p4ke18a p4ke20a p4ke22a p4ke24a p4ke27a p4ke30a p4ke33a p4ke36a p4ke39a p4ke43a p4ke47a p4ke51a p4ke part number reverse stand-off voltage v (v) rw m breakdown v oltage @i t v (v)min. br breakdown v oltage @it v (v)max. br te s t current it(ma) maximum clamping voltage @ipp vc(v) peak pulse current ipp(a) reverse leakage @v rw m i( a) r uni-polar bi-polar * electrical characteristics t able1 stand for commonly used models * p4ke6.8ca p4ke7.5ca p4ke8.2ca p4ke9.1ca p4ke10ca p4ke1 1ca p4ke12ca p4ke13ca p4ke15ca p4ke16ca p4ke18ca p4ke20ca p4ke22ca p4ke24ca p4ke27ca p4ke30ca p4ke33ca p4ke36ca p4ke39ca p4ke43ca p4ke47ca p4ke51ca 5.80 6.40 7.02 7.78 8.55 9.40 10.20 11.10 12.80 13.60 15.30 17.10 18.80 20.50 23.10 25.60 28.20 30.80 33.30 36.80 40.20 43.60 6.45 7.13 7.79 8.65 9.50 10.50 11.40 12.40 14.30 15.20 17.10 19.00 20.90 22.80 25.70 28.50 31.40 34.20 37.10 40.90 44.70 48.50 7.14 7.88 8.61 9.55 10.50 11.60 12.60 13.70 15.80 16.80 18.90 21.00 23.10 25.20 28.40 31.50 34.70 37.80 41.00 45.20 49.40 53.60 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.5 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 39.00 36.30 33.90 30.60 28.30 26.30 24.60 22.50 19.30 18.20 16.10 14.80 13.40 12.30 10.90 9.90 9.00 8.20 7.60 6.90 6.30 5.80 600 400 200 50 10 5 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 notes : 1.for bidirectional type having v of 10 volts and less, the i limit is double rw m r f or parts with a , the v is 5% 2. br .. . | rev 2016 08 10
spsemi www.spsemi.cn page 3 of 6 p4ke56a p4ke62a p4ke68a p4ke75a p4ke82a p4ke91a p4ke100a p4ke1 10a p4ke120a p4ke130a p4ke150a p4ke160a p4ke170a p4ke180a p4ke200a p4ke220a p4ke250a p4ke300a p4ke350a p4ke400a p4ke440a p4ke480a p4ke510a p4ke530a p4ke540a p4ke550a p4ke part number reverse stand-off voltage v (v) rw m breakdown v oltage @i t v (v)min. br breakdown v oltage @it v (v)max. br te s t current it(ma) maximum clamping voltage @ipp vc(v) peak pulse current ipp(a) reverse leakage @v rw m i( a) r uni-polar bi-polar electrical characteristics t able1 stand for commonly used models * p4ke56ca p4ke62ca p4ke68ca p4ke75ca p4ke82ca p4ke91ca p4ke100ca p4ke1 10ca p4ke120ca p4ke130ca p4ke150ca p4ke160ca p4ke170ca p4ke180ca p4ke200ca p4ke220ca p4ke250ca p4ke300ca p4ke350ca p4ke400ca p4ke440ca p4ke480ca p4ke510ca p4ke530ca p4ke540ca p4ke550ca 47.80 53.00 58.10 64.10 70.10 77.80 85.50 94.00 102.00 111.00 128.00 136.00 145.00 154.00 171.00 185.00 214.00 256.00 300.00 342.00 376.00 408.00 434.00 450.00 459.00 467.00 53.20 58.90 64.60 71.30 77.90 86.50 95.00 105.00 114.00 124.00 143.00 152.00 162.00 171.00 190.00 209.00 237.00 285.00 332.00 380.00 418.00 456.00 485.00 503.50 513.00 522.50 58.80 65.10 71.40 78.80 86.10 95.50 105.00 116.00 126.00 137.00 158.00 168.00 179.00 189.00 210.00 231.00 263.00 315.00 368.00 420.00 462.00 504.00 535.00 556.50 567.00 577.50 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 548.0 602.0 658.0 698.0 725.0 740.0 760.0 5.30 4.80 4.50 4.00 3.60 3.30 3.00 2.70 2.50 2.30 2.00 1.90 1.80 1.70 1.50 1.30 1.20 1.00 0.85 0.75 0.68 0.61 0.57 0.55 0.54 0.52 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 notes : 1.for bidirectional type having v of 10 volts and less, the i limit is double rw m r f or parts with a , the v is 5% 2. br p4ke(400w) series .. . rev 2016 08 10 |
spsemi rating and characteristic curves fig.1 peak pulse power rating curve fig.2 pulse derating curve t --ambient temperature( ) a 100 125 150 175 75 50 25 0 0 20 40 60 80 100 120 peak pulse power(p )or current(i ) pp ppm derating in percentage% www.spsemi.cn page 4 of 6 fig.3 pulse waverform fig.4 typ.junction capacitance uni-directional fig.5 steady state power dissipation derating curve 0 0 1.0 2.0 4.0 3.0 10/1000 s waveform as defined by r.e.a half v alue i ppm 2 tr=10 s peak value i ppm t= 2 5 j pulse width(td) is defined ad the point where the peak current decays to 50% of i ppm 50 100 150 i -peak pulse current(%) ppm t-t ime(ms) junction capacitance(pf) 1 10 200 10 100 1000 10000 v -reverse stand-off voltage(v) wm td 100 p -peak pulse power (kw) ppm 0.1 s 10 s 10ms 0.1 10 100 t d - p ulse width (sec.) 1 1.0 s 100 s 1.0ms 0 0 50 75 150 100 0.25 0.50 steady state power dissipation (w) t - lead temperature (c) l 25 125 1 175 200 0.75 1.0 p4ke(400w) series measrued at stand-of f voltage v wm measured at zero bias t=2 5 j f=1.0mhz vsig=50mvp-p l = 0.375" (9.5 mm) lead lengths 1.61.60.040" (40401mm) copper heat sirks fig.6 maximum non-repetitive peak forward surge current uni-directional only i -peak forward surge current(a) fsm 1 10 100 10 50 100 200 number of cycles at 60h z t= tm ax jj 8.3ms single half sine-wave (jedec method) 5 50 .. . rev 2016 08 10 non-repetitive pulse waveform shown in fig. 3 ta = 25 c
spsemi ... www.spsemi.cn page 5 of 6 marking code recommended soldering conditions recommended conditions reflow soldering t s t p t l ti me 25 time to peak temperature (t 25 to peak) t emperature t (min) s t (max) s t l t p preheat ramp-down ramp-up critical zone ttot lp reow condition pb-free assembly (see fig.1) pre heat -temperature min(t ) s(min) -t emperature max(t ) s(max) -t ime(min to max)(t ) s a verage ramp up rate (liquidus temp(t ) to peak) l t to t -ramp-up rate s(max) l reow -t emperature(t )(liquidus) l -t emperature(t ) l peak temp(t ) p t ime within 5 of actual peak temp(t ) p ramp-down rate time 25 to peak temp(t ) p do not exceed +150 +200 60-180secs 3 /sec.max. 3 /sec.max. +217 60-150secs +260(+0/-5) 30 secs.max. 6 /sec.max. 8 min.max. +260 p4ke(400w) series cathode band p4ke6.8a **** marking code logo date code p4ke6.8ca **** marking code logo date code rev 2016 08 10
packaging l w h b t e l2 l1 e a z o 5 dimensions in millimeters b a z e t l1-l2 5.0 0.5 52.0 1.0 1.2max 6.0 0.4 3.0max 1.0max l w h quantity 250.0 5.0 78.0 5.0 114.0 5.0 3000pcs ? www.spsemi.cn page 6 of 6 rev 2016 08 10 . . . p4ke(400w) series
|
